Shed Baron Canberra 5ft wide x 8ft deep Metal Lean To Shed (FG85LT)

EAN: 5055280401288
Shed Baron Canberra 5ft wide x 8ft deep Metal Lean To Shed
The Canberra Lean To range features fully reversible roof and doors.
5ft wide x 8ft deep metal garden lean to shed with fully reversible roof and doors

The pre-painted galvanised steel sheet used in the walls, roof and doors on the Canberra range has a base metal thickness of 0.25mm. It is high tensile and has 180 grams of Zinc Coating mer square metre.

The galvanised steel sheet used in the frame
on the Canberra range has a base metal thickness of 0.55 - 0.70mm. It is mild steel and has 275 grams of Zinc Coating mer square metre.


Note: The door can only be
located on the 5ft gable width.

Dimensions Base External*
Width  144cm 154cm
Depth
233cm  246cm
Height
203cm at the apex
Door Opening
width: 65cm opening door
Door Height
173cm


"External" refers to the maximum external dimension including roof overhangs. All sizes approximate. All require a suitable concrete or slab base or a timber floor kit.

All models in the Shed Baron Canberra range are made from HOT DIPPED GALVANISED STEEL throughout and feature vented gables as standard.

Price Promise

features of the canberra range
at a
glance

  • 12 year non-perforation guarantee
  • made from hot dipped galvanised steel throughout
  • strong exit / entry ramp across door width opening
  • no cracks
  • wall height of 178cms on all models (except 6ft x 4ft LOW Pent)
  • no warps
  • vented gables
  • rot and rodent proof
  • uncomplicated assembly
  • lasting good looks
  • wide range of accessories available
  • superior australian products
  • full base preparation details will be sent BEFORE the unit is delivered.

Select Your Options:

Would Your Like A Floor Kit?

The Total price of your Canberra metal garden shed appears at the foot of this page and changes as you select your options. A mirrored price is displayed in 'Your Running Total'For Base Installation Suggestions Please Click Here

Please select from the options below.
with a metal foundation kit

Foundation floor kit price(s) includes metal battens (illustrated) that are assembled to construct a frame. The foundation kit is flat packed and will need to be assembled. Concrete is used (not supplied) to flood between the metal battens to make the floor. Alternatively you can timber (not supplied) over the metal battens.
£60.00
with a timber floor kit

Timber floor kit price includes a fully pressure impregnated wooden floor (illustrated) consisting of pre-cut boards and battens. The timber floor is flat packed and will need to be assembled. All fixings included.
£85.00
with hilti screws and drill bit

The Hilti Hammerscrew (for concrete or flagstone bases) is a ready to use, quick set impact fastener with high expansion. Fits through pre-drilled holes in the shed's base rail. Masonry bit (15/64") supplied with the Hammerscrews. Can be removed with a cross recess srewdriver.

To add this accessory to your order please tick the check box top left.
£11.00

Would You Like Your Canberra Building Installed?

For Base Installation Suggestions Please Click Here

We can arrange to have your Building, Metal Foundation Kit, Timber Floor Kit and Accessories installed on site for you.
4 Installation Options are listed below.

Installation will usually commence on delivery of your building. This service is available to mainland UK but excludes the Highlands and Islands.

For Full TERMS & CONDITIONS Please Click Here

installation service@
Please select from the options below.
Install Building ONLY on prepared surface
This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£147.00
Install Building AND Metal Foundation Kit ONLY on prepared surface
Please tick the left box if you want your building and foundation kit installed. Please ensure that you have also ticked the Metal Foundation Kit option above. This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£161.00
Install Building AND Timber Floor Kit ONLY on prepared surface
Please tick the left box if you want your building and timber floor kit installed. Please ensure that you have also ticked the timber floor kit option above. This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£183.00
Install Additional Accessories ONLY valid with Install Building selected
Please tick the left box if you require additional accessories (e,g, double shelves) installed in your building during installation. The installation of one single or corner shelf is included in the above installation options. Please ensure you select your accessories below.
£10.00 Qty

May We Also Suggest

Canberra opening window kit
Canberra opening window kit

Add this option if you want to add an openable window to your shed. Includes 3mm thick sliding acrylic window kit approximately 615mm wide x 330mm high. The window kit is also supplied with a cut down wall panel to suit.

To add this accessory to your order please tick the check box top left.
£45.00 Qty
 
three piece set of corner shelves
three piece set of corner shelves

Add this option if you want to add three galvanised corner shelves and supports. Provides a good level of storage space to help organise all those small items.

To add this accessory to your order please tick the check box top left.
£58.00 Qty
 
PAY NO MONEY TODAY!
Payment will not be drawn down until your Shed Baron Canberra 5ft wide x 8ft deep Metal Lean To Shed is ready for dispatch... more

FREE UK DELIVERY*


Delivery usually within 10 - 14 working days

RRP £299.00
Total Price £274.99
You save £24.01 (8%)

Similar Products

Delivery Info
Your Running Total:
£0.00 inc VAT