Shed Baron Canberra 10ft wide x 7ft deep Metal Shed (FG107)

EAN: 5055280401226
Sale
Shed Baron Canberra 10ft wide x 7ft deep Metal Shed
The Canberra 10ft Wide range features a 307cm fronted hot-dipped galvanised quality steel
apex roofed shed, with ventilated gables and high 178cm wall height.

10ft wide x 7ft deep metal garden shed with double sliding doors built to last

The pre-painted galvanised steel sheet used in the walls, roof and doors on the Canberra range has a base metal thickness of 0.25mm. It is high tensile and has 180 grams of Zinc Coating mer square metre.

The galvanised steel sheet used in the frame
on the Canberra range has a base metal thickness of 0.55 - 0.70mm. It is mild steel and has 275 grams of Zinc Coating mer square metre.

Dimensions Base External*
Width 295cm 307cm
Depth
206cm 216cm
Height
203cm at the apex
Door Opening
width: 138cm double doors
Door Height
170cm


"External" refers to the maximum external dimension including roof overhangs. All sizes approximate. All require a suitable concrete or slab base or a timber floor kit.

All models in the Shed Baron Canberra range are made from HOT DIPPED GALVANISED STEEL throughout and feature vented gables as standard.

Price Promise

features of the canberra range
at a
glance

  • 12 year non-perforation guarantee
  • made from hot dipped galvanised steel throughout
  • strong exit / entry ramp across door width opening
  • no cracks
  • wall height of 178cms on all models (except 6ft x 4ft LOW Pent)
  • no warps
  • vented gables
  • rot and rodent proof
  • uncomplicated assembly
  • lasting good looks
  • wide range of accessories available
  • superior australian products
  • full base preparation details will be sent BEFORE the unit is delivered.

Select Your Options:

The Total price of your Canberra metal garden shed appears at the foot of this page and changes as you select your options. A mirrored price is displayed in 'Your Running Total'. To add an option please tick the check box in the top left corner. Finally click the Buy button to add to your basket. For Base Installation Suggestions Please Click Here.

Please select from the options below.
with a metal foundation kit

Foundation floor kit price(s) includes metal battens (illustrated) that are assembled to construct a frame. The foundation kit is flat packed and will need to be assembled. Concrete is used (not supplied) to flood between the metal battens to make the floor. Alternatively you can timber (not supplied) over the metal battens.
£75.00
with a timber floor kit

Timber floor kit price includes a fully pressure impregnated wooden floor (illustrated) consisting of pre-cut boards and battens. The timber floor is flat packed and will need to be assembled. All fixings included.
£145.00
with a skylight roof panel

Add this option if you want to add a Skylight roof panel to your shed to allow in daylight through the roof.

To add this accessory to your order please tick the check box top left.
£22.00 Qty
with hilti screws and drill bit

The Hilti Hammerscrew (for concrete or flagstone bases) is a ready to use, quick set impact fastener with high expansion. Fits through pre-drilled holes in the shed's base rail. Masonry bit (15/64") supplied with the Hammerscrews. Can be removed with a cross recess srewdriver.

To add this accessory to your order please tick the check box top left.
£12.00

Would You Like Your Canberra Building Installed?

We can arrange to have your Building, Metal Foundation Kit, Timber Floor Kit and Accessories to be installed on site for you. For Base Installation Suggestions Please Click Here.

Installation will usually commence on delivery of your building.

This service is available to mainland UK but excludes the Highlands and Islands.

For Full TERMS & CONDITIONS Please Click Here

installation service@
Please select from the options below.
Option 1: Building ONLY to be installed on prepared surface

Please tick the left box to have your building installed.
This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£190.00
Option 2: Building AND Metal Foundation Kit ONLY to be installed on prepared surface

Please tick the left box if you want your building and foundation kit installed. Please ensure that you have also ticked the Metal Foundation Kit option above. This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£210.00
Option 3: Building AND Timber Floor Kit ONLY to be installed on prepared surface

Please tick the left box if you want your building and timber floor kit installed. Please ensure that you have also ticked the timber floor kit option above. This option also INCLUDES the installation of one single or corner shelf (select shelves below).
£244.00
Additional Accessory Installation ONLY valid when selected with installation options 1,2 or 3 above

Please tick the left box if you require additional accessories (e,g, double shelves) installed in your building during installation. The installation of one single or corner shelf is included in the above installation options. Please ensure you select your additional accessories below.
£10.00 Qty

May We Also Suggest

Canberra opening window kit
Canberra opening window kit

Add this option if you want to add an openable window to your shed. Includes 3mm thick sliding acrylic window kit approximately 615mm wide x 330mm high. The window kit is also supplied with a cut down wall panel to suit.

To add this accessory to your order please tick the check box top left.
£45.00 Qty
 
three piece set of corner shelves
three piece set of corner shelves

Add this option if you want to add three galvanised corner shelves and supports. Provides a good level of storage space to help organise all those small items.

To add this accessory to your order please tick the check box top left.
£58.00 Qty
 
rear mounted single shelf for 10ft wide shed
rear mounted single shelf for 10ft wide shed

Add this option if you want to add one rear shelf to fit securely across the back wall of your 10ft wide Canberra shed. Long shelf supports rails covered 12mm MDF shelving material. Complete with all fixings

To add this accessory to your order please tick the check box top left.
£87.00 Qty
 
rear mounted set of 2 shelves for 10ft wide shed
rear mounted set of 2 shelves for 10ft wide shed

Add this option if you want to add two rear shelves to fit securely across the back wall of your 8ft wide Canberra shed. Long shelf supports rails covered 12mm MDF shelving material. Complete with all fixings

To add this accessory to your order please tick the check box top left.
£140.00 Qty
 
PAY NO MONEY TODAY!
Payment will not be drawn down until your Shed Baron Canberra 10ft wide x 7ft deep Metal Shed is ready for dispatch... more


Delivery usually within 10 - 14 working days

RRP £395.00
Normal Selling Price £369.99
Sale Price £349.95
You now save £45.05 (11%)

Similar Products

Delivery Info
Your Running Total:
£0.00 inc VAT